sscvfsys 에러 발생

3.jpg

supercache, ramdisk 등을 사용하였을 때 오류가 발생할 경우에 뜨는 블루스크린이다.

제작사 수퍼스피드사에서는 다음과 같은 해결책을 제시한다.
http://www.superspeed.com/desktop/faq.php

Q:SuperCache 3SuperVolumeA:Certain disk management software, including some backup software, may be incompatible with SuperCache 3SuperVolumeSuperCache 3/SuperVolume

There are several possible routes to disabling the "SscVf.sys" driver. However, depending on the point of conflict, some may not be available. We suggest trying the following, in order:
•Boot into "Safe Mode", and uninstall the disk management software, or SuperCache 3SuperVolume,•Boot using "Last Known Good Configuration", and uninstall SuperCache 3SuperVolume•Boot into "Recovery Console", and edit the system hive.

Boot into "Safe Mode"

  1. Start the computer.
  2. If there is an extended POST and BIOS period, wait until it nears its end.
  3. Press F8 (for Windows startup options) once per second.
  4. Select "Safe Mode".
  5. If the computer does not startup successfully, try "Boot using 'Last Known Good Configuration'".
  6. Uninstall the incompatible disk management or backup software, or uninstall SuperCache 3SuperVolume
  7. Restart the computer.
  8. Boot using "Last Known Good Configuration"

    1. Start the computer.
    2. If there is an extended POST and BIOS period, wait until it nears its end.
    3. Press F8 (for Windows startup options) once per second.
    4. Select "Last Known Good Configuration (your most recent settings that worked)".
    5. If the computer does not startup successfully, try "Boot into 'Recovery Console'".
    6. Uninstall SuperCache 3SuperVolume
    7. Restart the computer.
    8. Boot into "Recovery Console"

      This solution requires: •A second working computer,•A removable media device capable of holding several megabytes of data which can be used with the working and the broken computer. Recovery Console recognizes USB flash drives; they are an ideal storage device for this solution.
      Warning:
      1. Insert the USB drive in the broken computer.
      2. Boot the broken computer into Recovery Console. Typically this is done by booting with the installation CD.
      3. Cd to "%SystemRoot%\system32\config".
      4. Copy the file "system." to "system-backup.". This will be the backup copy of the system hive.
      5. Copy the file "system." to the USB drive.
      6. Shutdown the broken computer and remove the USB drive.
      7. Insert the USB drive in the working computer.
      8. Open "RegEdit", and click on "HKEY_LOCAL_MACHINE".
      9. Select "File\Load Hive..." from the menu. Open the "system." file on the USB drive, and give the hive key a unique name (eg. "special").
      10. Edit each Control Set present in the "special" hive key:
        1. Select a "ControlSetXxx" key and navigate to "ControlSetXxx\Services\SscVf"
        2. Double-click on the "Start" REG_DWORD value.
        3. Change the value to "4".
        4. In the same "ControlSetXxx" key navigate to "ControlSetXxx\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}"
        5. Double-click on the "UpperFilters" REG_MULTI_SZ value.
        6. Carefully delete the "SscVf" text from the list. Do not leave any blank entries except at the end.
        7. Repeat steps a - f for all ControlSetXxx keys.
        8. Click on the "special" hive key. Select "File\Unload Hive..." from the menu.
        9. Remove the USB drive from the working computer and insert it in the broken computer.
        10. Boot the broken computer into Recovery Console.
        11. Copy the "system." file from the USB drive to the "%SystemRoot%\system32\config" folder, overwriting the original file.
        12. Restart the broken machine.
        13. Important:SuperCache 3SuperVolume•More than one AMD Opteron processor•More than two Intel Xeon processors with Hyperthreading•More than four Intel Xeon processors without Hyperthreading
          supercache, ramdisk 등 사용하였 때 오류가 발생할 경우에 뜨는 블루스크린이다.

          제작사 수퍼스피드사에서는 다음과 같은 해결책 제시한다.
          http://www.superspeed.com/desktop/faq.php

          Q: 저는 SuperCache 3 (또는 SuperVolume)를 설치 하 고 지금 내 시스템 시작 되지 않습니다. 나는 그것을 어떻게 고정 시킵니까?
          A: 일부 백업 소프트웨어를 포함 하 여 디스크 관리 소프트웨어 특정 SuperCache 3 또는 Supervolume와 호환 되지 수 있습니다. 동시에 설치 하는 경우 시스템 교수형 되거나 시작 하는 동안 충돌. 시스템을 부팅 가능 만들기 위해 가장 빠른 경로 SuperCache 3/SuperVolume "SscVf.sys" 드라이버를 사용 하지 않도록 설정 하는 것.

          "SscVf.sys" 드라이버를 비활성화 한 가능한 경로가 여러 개 있습니다. 그러나 충돌의 포인트에 따라 일부 하지 못할. 다음 순서 대로 시도 하는 것이 좋습니다.
          • "안전 모드"로 부팅 하 고 디스크 관리 소프트웨어 또는 SuperCache 3 또는 SuperVolume, 제거
          • "마지막으로 성공한 구성"을 사용 하 여 부팅 및 SuperCache 3 또는 SuperVolume, 제거
          • "복구 콘솔"로 부팅 하 고 시스템 하이브를 편집 합니다.
          "깨진된" 컴퓨터는 로그온 화면 및 다음 충돌 또는 중단 되 면, "'' 복구 콘솔에 부팅"로 건너뜁니다.

          "안전 모드"로 부팅
            컴퓨터를 시작 합니다.
            게시물 및 BIOS 장기간 이면 끝을 앞두고 때까지 기다립니다.
            초당 한 번 (Windows 시작 옵션)에 대 한 f8 키를 누릅니다.
            "안전 모드"를 선택 합니다.
            컴퓨터가 성공적으로 시작 하지 않습니다, "'마지막으로 알려진 좋은 구성'을 사용 하 여 부팅" 보십시오.
            호환 되지 않는 디스크 관리 또는 백업 소프트웨어를 제거 하거나 SuperCache 3 Supervolume를 제거 합니다.
            컴퓨터를 다시 시작 합니다.
            "마지막으로 성공한 구성"을 사용 하 여 부팅
              컴퓨터를 시작 합니다.
              게시물 및 BIOS 장기간 이면 끝을 앞두고 때까지 기다립니다.
              초당 한 번 (Windows 시작 옵션)에 대 한 f8 키를 누릅니다.
              "마지막으로 성공한 구성 (작동 한 최근 설정값)"을 선택 합니다.
              컴퓨터가 성공적으로 시작 하지 않습니다, "'' 복구 콘솔에 부팅"을 보십시오.
              SuperCache 3 또는 Supervolume를 제거 합니다.
              컴퓨터를 다시 시작 합니다.
              부팅 "복구 콘솔"에

              이 솔루션에 필요한: • A 두 번째 작업 컴퓨터
              • 이동식 미디어 장치를 노력과 깨진된 컴퓨터와 함께 사용할 수 있는 데이터의 여러 메가바이트를 보유 합니다. 복구 콘솔 인식 USB 플래시 드라이브; 그들은이 솔루션에 대 한 이상적인 스토리지

              경고:이 솔루션에는 시스템 레지스트리 하이브를 수동으로 수정을 해야합니다.

              깨진된 컴퓨터에 USB 드라이브를 삽입 합니다.
              복구 콘솔에 깨진된 컴퓨터를 부팅 합니다. 일반적으로이 설치 CD로 부팅 하 여 이루어집니다.
              Cd "%systemroot%\system32\config".
              파일 복사 합니다 "시스템." "시스템 백업"을. 이 시스템 하이브의 백업 복사본을 될
              파일을 복사 합니다 "시스템." USB 드라이브.
              깨진된 컴퓨터 종료 및 USB 드라이브를 제거 합니다.
              작업 컴퓨터에 USB 드라이브를 삽입 합니다.
              "RegEdit"를 열고 "HKEY_LOCAL_MACHINE" .
              메뉴에서 "File\Load 하이브..."를 선택 합니다. 열려 있는 "시스템." USB 드라이브에 파일 및 줄 하이브 키 고유 이름 (예:. "특별 한").
              각 제어 설정 있는 "특별 한" 하이브 키를 편집:
              "ControlSetXxx" 키를 선택 하 고 "ControlSetXxx\Services\SscVf"로 이동
              "시작"을 두 번 REG_DWORD 값.
              "4"로 값을 변경 합니다.
              동일한 "ControlSetXxx" 키에서 "ControlSetXxx\Control\Class\ {71A27CDD-812A-11D0-BEC7-08002BE2092F}" 이동
              두 번 "UpperFilters" REG_MULTI_SZ 값.
              신중 하 게 목록에서 "SscVf" 텍스트를 삭제 합니다. 끝에 제외한 모든 빈 항목을 두지 마십시오.
              A-모든 ControlSetXxx 키에 대 한 f 단계를 반복 합니다.
              "특별 한" 하이브 키를 합니다. 메뉴에서 "File\Unload 하이브..."를 선택 합니다.
              작업 컴퓨터에서 USB 드라이브를 제거 하 고 깨진된 컴퓨터에 넣습니다.
              복구 콘솔에 깨진된 컴퓨터를 부팅 합니다.
              USB 드라이브에서 원래 파일을 덮어쓰지 "%systemroot%\system32\config" 폴더 "시스템." 파일을 복사 합니다.
              깨진된 컴퓨터를 다시 시작 합니다.
              중요: 항상 SuperCache 3 또는 Supervolume의 최신 버전 설치. 1.0.11.0 이전 버전에는 응답 하지 않거나 시스템 시작 시 다시 시작 하려면 일부 컴퓨터를 일으킨 버그 포함 되어 있습니다. 버그 영향을 다음 프로세서 하드웨어 구성 가진 컴퓨터: • 하나 이상의 AMD Opteron 프로세서
              • 하이퍼스레딩 두 개 이상의 인텔 제온 프로세서
              • 하이퍼스레딩 없이 4 개 이상의 인텔 제온 프로세서
              [자동 번역 제공: Microsoft® Translator]


          [OGTITLE]sscvfsys 에러 발생[/OGTITLE]

          이 글을 공유하기

          댓글(0)

          Designed by 테크윈